FX Luke (Graflex) and FX Vader conversion

[sherman]

Hi guys,

I am a total Star Wars fan but relatively new to the whole saber community. I have got my hands on two FX sabers recently and would like to convert them so they can fit into my display stands. I have gone through multiple threads in the forum already but I am still not certain around the parts that are required for a proper conversion.

I have created a part list for both but I am not sure if anything is missing. I would appreciate if someone could have a look and let me know if all parts are included. Also I am not sure what blade sizes fit once the sabers are converted.

Luke:
http://www.thecustomsabershop.com/8-...crew-P548.aspx
http://www.thecustomsabershop.com/Ha...kit-P1225.aspx
http://www.thecustomsabershop.com/Ro...ova-P1004.aspx
http://www.thecustomsabershop.com/Se...pins--P87.aspx
http://www.thecustomsabershop.com/Co...-angle-P4.aspx
http://www.thecustomsabershop.com/St...-LED-P483.aspx
http://www.thecustomsabershop.com/Cr...lder-P999.aspx

Vader:
http://www.thecustomsabershop.com/MR...-kit-P343.aspx
http://www.thecustomsabershop.com/Re...ova-P1001.aspx
http://www.thecustomsabershop.com/Co...-angle-P4.aspx
http://www.thecustomsabershop.com/St...-LED-P483.aspx
http://www.thecustomsabershop.com/Cr...lder-P999.aspx

Many thanks,

Sherman

[emperor Vader]

List is good. Switch to the 8.7 degree led lens. And after the conversion the lightsaber will take a 1" diameter blade.