Results 1 to 6 of 6

Thread: Nano biscotte simple question

  1. #1

    Default Nano biscotte simple question

    So I have to be honest. My rgb "reyflex" build was powered by a igniter 2 soundboard. Umm that being said the wiring looks very similar but I'm a little confused. Are you not supposed to attach multiple wires to a single pad on the nano biscotte? The general wiring diagram shows wires connected to other wires and I'm wondering are you supposed to strip a bit of the wire case off and solder/heat shrink the spot the same way you would for attaching a resistor?

  2. #2
    Jedi Padawan
    Sith Adept
    Jedi Padawan
    Cire Yeldarb's Avatar
    Join Date
    May 2013
    Location
    United States
    Posts
    595

    Default

    Either way works, it's whatever you are more comfortable with.

  3. #3

    Default

    Quote Originally Posted by Cire Yeldarb View Post
    Either way works, it's whatever you are more comfortable with.
    Thank you so much, this is very good to know. Another way to save space if necessary.

  4. #4

    Default

    I'm unsure about the set up for the wiring of FoC. Do the two identical die have to be wired in series or can they be wired separately to the (+) pad with their own resistor?
    Last edited by LightsaberToothedTiger; 01-09-2017 at 11:28 PM.

  5. #5

    Default

    They have to be wired in parallel each with their own resistor.

  6. #6

    Default

    Quote Originally Posted by Greenie View Post
    They have to be wired in parallel each with their own resistor.
    Dope. So wire each positive pad of red and attach the resistor to each and then join the wires if desired/simplify things. Thanks dude!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •