Results 1 to 4 of 4

Thread: Buck Pucks and the NB for first time builder

  1. 12-23-2016, 03:08 PM #1
    Bandersnatch
    Bandersnatch is offline
    Join Date
    Nov 2016
    Location
    USA
    Posts
    1

    Default Buck Pucks and the NB for first time builder

    First time builder looking for a wiring diagram for a NB and a Buck Puck.
    Reply With Quote Reply With Quote
  2. 12-23-2016, 03:27 PM #2
    darth_chasm
    darth_chasm is offline
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,756
    Blog Entries
    2

    Default

    The NB and buckpuck won't work together you'll need to use resistors instead.
    末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末
    Reply With Quote Reply With Quote
  3. 12-23-2016, 09:48 PM #3
    Silver Serpent
    Silver Serpent is offline
    Jedi Council Member Silver Serpent's Avatar
    Join Date
    Jul 2010
    Location
    USA
    Posts
    4,152

    Default

    That's correct. The buckpuck needs a minimum of 5v, and the NB takes a maximum of 5.5v. There's not enough wiggle room to make it work without damaging something.
    We all have to start somewhere. The journey is all the more impressive by our humble beginnings.

    http://led.linear1.org/1led.wiz for the lazy man's resistor calculator!
    http://forums.thecustomsabershop.com...e-to-Ohm-s-Law for getting resistor values the right way!
    Reply With Quote Reply With Quote
  4. 01-02-2017, 09:05 AM #4
    T-RO
    T-RO is offline
    Join Date
    Jul 2015
    Location
    United States
    Posts
    19

    Default

    You don't need a buckpuck if you're using a NB.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules