Results 1 to 4 of 4

Thread: Emitter problems

  1. #1

    Default Emitter problems

    I have a obi wan rots saber and the emitter doesn't want to come off. What ls the best strap wrench to use without damaging the emitter?

  2. #2
    Jedi Initiate hapki's Avatar
    Join Date
    May 2014
    Location
    United States
    Posts
    452
    Blog Entries
    19

    Default

    Have you tried putting it in the freezer for a while? That plus lots of WD-40 worked for me once. I think the lower temperature causes the metal to contract and lets is slide some.

  3. #3

    Default

    I've tried heat and cold, some wd40 all the while using a strap wrench and a vice. The obi wan rots emitter still won't budge. Noooooooooooooooooo! Lol

    And I can't even break the plastic like you can with the rotj luke because there's a pin all the way through.


    Any other advice?

  4. #4

    Default

    Having tried those things the only other thing i can think of is letting it soak in 50/50 mix of brake fluid and diesel fuel. Yes you read that right. Keep an eye on it tho.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •