External weathering completed. I had to do the brass differently since I could not get the piece to respond to acetone fumes. It's hanging now to let the matte clear dry.
IMG_3357.jpg
IMG_3358.jpg
IMG_3359.jpg
External weathering completed. I had to do the brass differently since I could not get the piece to respond to acetone fumes. It's hanging now to let the matte clear dry.
IMG_3357.jpg
IMG_3358.jpg
IMG_3359.jpg
IMG_3365.jpg
I really like the look of this blade plug with this emitter.
Changing up the chamber a bit to an older design. Still some work to do on spacers as the beads are too wide.
IMG_3375.jpg
IMG_3377.jpg
IMG_3378.jpg
IMG_3381.jpg
Turned down brass nuts on the drill to use as spacers.
IMG_3406.jpg
IMG_3405.jpg
I'm liking how the reveal will display.
Got in the perfect switch caps for the build! Now to build something to hold the switches inside the box.
IMG_3481.jpg
IMG_3482.jpg
What are those switch caps from? I need a red anodized switch cap as well and I'd prefer not to have to anodize it myself.
I found them on Etsy. Expensive due to international shipping but very nice.Originally Posted by NanoRex
Converted a KR Sabers plug into a Photon plug. I decided that my main dies for this Blade will be B and RB. Deep red FOC.
IMG_3635.jpg
Lit with white LED, the blue will be awesome!
IMG_3641.jpg
Last edited by Darth Nurse; 03-17-2017 at 05:17 PM.
So, now I need to build a way to hold this switch in place...
IMG_3640.jpg
Posting Permissions
Reply With Quote
Bookmarks