-
First shot at Nano Biscotte, and I need advice!
Hey guys! I was looking at using the Nano Biscotte for an upcoming build of mine, but before I commit and buy parts, I wanted to clear up a couple questions I had. The plan is for a simple setup, with a single green LED, no flash, standard momentary switch, no recharge port. This will be a gift for my son, his first lightsaber, so none of the "bells and whistles" apart from having decent sound are really necessary, but I still want it to be a quality saber. Anyway, my questions:
1.) This is my biggest question/concern: what would be the best battery set up to use for the NBV3? Four AAA, two AA, LI, et cetera? Like I said, it will be my first time using it, and admittedly, I got a little bogged down by the specs on the product page.
2.) I was perusing through the MWS selections and noticed that there isn't a resistor anywhere amidst all that, but read that NBV3 has a power extender, so does that go in place of it or something? (I likely won't use the MWS options since it would be more expensive, and there would be a lot more extra wire that will ultimately get in my way.) Simply put, will I need to get a resistor as well, or does the NBV3 take care of that on its own?
And that's about it. All the basics of wiring and saber construction I have down, and if I have any more questions I'll tack it onto this.
Thank you in advance, and happy sabering to all! (I'll be sure to post pictures when the build is finished!)
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks