Hello Everyone!

I completed my first saber a few months ago, unfortunately I got so wrapped up in it I forgot to take any progress pics to share. I will say that thanks to the help of everyone here, it was a resounding success. Now that I've made one, I just want to make more!

For my second saber, I want to do something a bit more fancy. I used NB3 for my first build and it works great, but I've seen sabers that Madcow has done where the hilt features a second momentary switch which can be used to trigger clash effects and "lockup" effects. Is that the Crystal line of cards which feature that option? If so, is there any place which would show a wire diagram of that setup?

If you have used a CF card, how would you compare it's motion sensitivity to an NB? I've done some editing in the SD card settings on the motion sensitivity on my NB and it still seems difficult to draw out a motion sound with more subtle movements.

I'm thinking about doing a Crystal Chamber in this build, I love crystal chambers and I have a crystal already picked out. I would have done a chamber in the last build but I ran out of room and didn't think ahead on wire placement. I'm going to take my time with this one and make sure it all fits in a neat and organized fashion before anything is put together. Again, saw a Madcow vid and saw he used an RGB led for his crystal chamber on the CF8, can you do the same thing with a single color LED, in my case, a green accent LED from the CSS Store? Additionally, those of you who had a Crystal Chamber, how did you go about hiding your wire/ letting it pass through the chamber to the emitter/card without being seen?

Thanks everyone, can't wait to start my next build, the ability to use R.I.C.E. is pretty enticing, even though it'll likely just be Green 99% of the time.