Unscrewing Pommel with MPS Insert 6 and Recharge Port
I'm curious how people secure MPS Insert 6 to the pommel, screw in the recharge port, and then screw the pommel onto the main body without twisting up the wires on the recharge port. Then, of course, you run into the same problem when you go to unscrew the pommel.
Is there a way to wait to secure the insert to the pommel AFTER screwing the pommel on or is there some other way this is typically done?
Last edited by TheCheeker; 12-09-2016 at 08:59 AM.
The insert should be able to spin while inside the pommel. Before you wire up, try testing using needle nose pliers (or similar) to hold the insert in place while you screw on the pommel.
末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末
I've always just glued in the insert in the past. I'm guessing the C-clip from the shop is a better solution then?Originally Posted by darth_chasm
Yeah, that's how I've done it.
末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末
I never did figure out how to use that darn thing... I'm sure Madcow's got a video out there for it. I'll have to track it down.
Reply With Quote
Bookmarks