Results 1 to 2 of 2

Thread: MHSV2 heatsink holes and positioning

  1. #1

    Default MHSV2 heatsink holes and positioning

    Hi There,

    I am wondering what size the holes in the copper heatsink are, for MHSv2 heatsink.. I'd love to be able to thread one of them and insert a 440 chassis rod into it, to line-up with MHSv2 chassis disks if possible

    (yes, I realize the OD of the heatsink is more than the acrylic disks, that's ok)

  2. #2

    Default

    I would assume the holes are the same as an MHSv1 heatsing since they are designed to match the notches in the LED module.
    Holes are 1/8" and on a /75" circle o an MHSv1.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •