Results 1 to 8 of 8

Thread: Rip And Tear (NBv3, soon other boards)

  1. #1

    Default Rip And Tear Soundfont (Plector & NEC)



    Ladies and gentlemen, I present "Rip And Tear"

    It's 95% comprised of edited and arranged clips from the soundtrack to the video game Doom (2016) by Mick Gordon. The rest of the sounds are just select sounds from a standard lightsaber to give it that extra "oomph" in the clashes. Doom has an extremely dark and visceral soundtrack with very evil and distorted guitar and synth sounds that were just screaming at me to be made into a Sith saberfont. I've only tested it with a NBv3 so far (8 swings, 8 clashes, poweron/off, boot/hum) but I also have a saber with a Spark 1 that I can test with later on with more swings/clashes, lockup, and blaster sounds. The saberfont itself has 19 clashes and 26 swings. I may narrow those down if they sound too different.

    Also, my saber is actually blue and I don't have a red LED so I shifted the hue of the video to a red colour because I thought it was more fitting to demonstrate with.
    Last edited by MusicallyInspired; 11-21-2016 at 09:54 PM.

    SHADOW'S BANE
    Still needs:
    -Powder coating/Enamel
    Would be nice:
    -Sleeve
    -Etching design
    -Case

  2. #2

    Default

    Hey Inspired, nice work!
    I'd be willing to test this on a Crystal Focus if you'd like.
    If you have all the CF sounds and whatnot.
    I've been testing fonts for some time for Baconwizard at FX, so I do have some experience,
    for what it's worth
    I will PM you, and let you decide.
    -Darkmatter73

  3. #3

    Default

    Sent you a PM.

    I've got all the sounds ready (for testing, anyway). I narrowed them down to:

    blaster x4
    boot x4
    clash x16
    hum x1
    lockup x1
    poweroff x1
    poweron x1
    spin x4
    swing x16

    Once it gets past a bit of QA, I'll release it.

    SHADOW'S BANE
    Still needs:
    -Powder coating/Enamel
    Would be nice:
    -Sleeve
    -Etching design
    -Case

  4. #4

    Default

    I finished it! Added more sounds for a more complete set. Works with both NEC and Plector boards. I made a demo video:

    Last edited by MusicallyInspired; 11-22-2016 at 04:14 PM.

    SHADOW'S BANE
    Still needs:
    -Powder coating/Enamel
    Would be nice:
    -Sleeve
    -Etching design
    -Case

  5. #5

    Default

    I lime it. I'm a big fan of Doom as is. That'll be a good one to add to the library. Good work.

  6. #6

    Default

    Well done sir, love the final product! Sounds nice and polished =)

    -Darkmatter73

  7. #7

    Default

    Thank you, guys.

    SHADOW'S BANE
    Still needs:
    -Powder coating/Enamel
    Would be nice:
    -Sleeve
    -Etching design
    -Case

  8. #8

    Default

    Rip And Tear is now available on Saberfont (Plector and NEC compatible)!

    SHADOW'S BANE
    Still needs:
    -Powder coating/Enamel
    Would be nice:
    -Sleeve
    -Etching design
    -Case

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •