Anything im missing

[Darth Ethan]

Nano biscoti is sold out on the custome saber shop but im going to get the othere parts so i have them for when the sound board is back in stock. am i missing anything 1.Luxeon Rebel Star
1.Star thermal tape pad - Single LED
1.Collimator Lens 8.7 deg viewing angle
2 .1ohm 5w resistor
2 .5ohm 3w resistor
1.Premium 28mm Speaker
1.18650 Single Cell Holder
1.TrustFire Protected 3.7V 2400mAh 18650 Li-Ion Battery (2-pack)
1.TrustFire TR-001 All-in-One Charger
3.26 gauge wire (sold by the foot) (Red)
26 gauge wire (sold by the foot) black
26 gauge wire (sold by the foot) (Blue)
1.MHS speaker mount V6 - For 28mm Speakers
1.16mm Anti Vandal Momentary Stainless Switch

anything els i need? i already have the hilt parts just need the electronics.

[Generic Jedi]

If your rebel star LED is a single LED, you'll need a lense holder. If you're using a tri-rebel, you won't need the lense holder.

Get more than one thermal tape. It's easy to mess up the first time.

[rlobrecht]

Do you have a heat sink?

[Darth Ethan]

yes
i do

[Darth Ethan]

If your rebel star LED is a single LED, you'll need a lense holder. If you're using a tri-rebel, you won't need the lense holder.

Get more than one thermal tape. It's easy to mess up the first time.

i added the Cree/Rebel Lens Holder like you sugested