Anakin saber parts

[Orgazmo1109]

Im making a anakin replica and wonder where i can obtain certain parts. on the side of the saber there is like a big redish switch and some kind of recharge looking plug right next to it. Anyone know where i can obtain these?

"if this has been asked before sorry. But if all your gonna say is search newb then dont reply. thank you."

[elrond.406]

Try Blast tech or, the cheaper way, get an MR FX?

See, I was nice to the n0.. ::cough:: newbie :P

[vortextwist]

here is some stuff but if you are goin to convert it to an led saber than I would get the holder from tim.
http://www.graflexshop.com/

[Lord Maul]

keep an eye out on eBay. circuit boards for the ani's come on every once in a while. i would just buy a broken MR and take what you need

[vortextwist]

broken mr's are not completely accurate to an original graflex.
here is some reference stuff.
http://members.aol.com/yodashous2/building.htm

[xwingband]

He said Anakin... I think that means he wants the ROTS saber.

That's going to be difficult. The graflex button will be close, but the recharge ports are part of the holder. Depending on how you want to make your saber there is a multitude of things to think off. Getting an FX saber is probably the easiest.

[Orgazmo1109]

cool hopefully i can find a broken one or something on ebay. ill check blastech also. thanks guys.

[vortextwist]

which one of these do you think would look best on an ani ep3 mr?

http://www.graflexshop.com/images/eye_thumb01_lg.gif
http://www.graflexshop.com/images/buttonT_01_lg.gif

[xwingband]

which one of these do you think would look best on an ani ep3 mr?

http://www.graflexshop.com/images/eye_thumb01_lg.gif
http://www.graflexshop.com/images/buttonT_01_lg.gif

If you want the blade holder in the front... or the back? Either is nice. I went for the button on my conversion. The front copper one is distinct to the saber. I didn't want to get rid of it. Not a totally bad idea if you brutalize it though.

[vortextwist]

cool, thanks X.