Results 1 to 3 of 3

Thread: Rechargeable alternative to 4xAAA pack for Master Replicas board

  1. #1

    Default Rechargeable alternative to 4xAAA pack for Master Replicas board

    I have a saber I built back in 2007/2008 with 1500ma K2 LED and an old Master Replicas Vader ESB sound board. At the time I used the 4xAAA holder from the store and since then I've been swapping batteries whenever they die...which is annoying and expensive.

    I'm looking for a rechargeable alternative so I can use a simple recharge port and avoid having to swap batteries so often. I have no idea what that old MR board needs in terms of voltage and I'd rather not replace my resistors in the conversion. Is there any rechargeable solution that will work for me?

    Thanks!
    Last edited by TheCheeker; 09-04-2016 at 07:52 PM. Reason: added LED info

  2. #2

    Default

    NiMH or Li-ion will work, but if you've got resistors for a 6v source, you will likely have to change or remove the resistors.

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.

  3. #3

    Default

    Well I'm glad it'll work but I'm bummed I'd have to swap out the resistors. Oh well, not the end of the world.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •