-
Kylo ren wiring help
Im converting another kylo ren fx lightsaber but I'm in the wiring test part but it only turns on for a second with lights and sound and then turns off.
I'm using the stock leds for the side blades and a rebel star deep red for the main blade. 20160823_214601.jpg20160823_214657.jpg20160823_214607.jpg20160823_214554.jpg
-
those joints look pretty cold I would recommend resoldering those or the joints will break off. Also you need to solder wires to the actual board itself. take a look at shameems post again. I havent done the conversion yet and I plan on it after christmas so I will let you know.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks