Well I'm confused.
You can wire a switch so that the switch's LED will light up when the kill key is removed but the main LED will not turn on until you press the switch. You don't need 2 switches
You seem to have 3 switches. 2 are daisy chained together and connect directly to the main LED, bypassing the sound card, and the third appears to be looped through the main LED pads and back to the sound card for no reason. Your power from the battery (red wire) loops back to the main LED (white wires) from the same terminal on the sound card - effectively bypassing the sound card.
You are going to let
the magic smoke out for sure.
Have to read the manual that came with the sound card? There are several wiring diagrams included.
IF not, go here:
customsabershop/Nano-Biscotte-Sound-module v3 click the link marked 'Owner's manual', save it and read through it. Twice.
Then go here:
Youtube - TheCustomSaberShop and watch the video on wiring up an illuminated switch, and a recharge port, and everything else . Twice.
Bookmarks