Ok, so I won this sound board on the scratch and dent auctions, and have been trying to work out how to wire it. Has anyone ever done this one before? On the disc with the pins there are four wires, as follows: "VA" (red), "VB" (oarnge), "GND" (brown), and "SP" (yellow). Now with a 9v connected with the positive to VA and VB, and the negative on GND, it lights up the EL blade nicely with the switch. However, I cannot get it to make any sound. I have tried hooking one speaker lead to the SP wire and the other to the GND wire, but nothing happened. Any help here would be greatly appreciated.
-Luke
Bookmarks