Results 1 to 2 of 2

Thread: Green ROTS Conversion

  1. #1

    Default Green ROTS Conversion

    I put a shaved-down momentary switch in the control box that linked to the clash sensor pads on the stock MR board, to allow a type of "blaster deflect" option.

    green Flex 3.jpggreen Flex 1.jpggreen Flex 2.jpg
    So certain are you; always with you it cannot be done.
    Hear you nothing that I say?


    http://www.plecterlabs.com/Media/Doc...deTutorial.pdf
    http://forums.thecustomsabershop.com...Hardware-Saber
    ---------------------

  2. #2

    Default

    Clever. You could also wire the clash sensor to the white die of a Tri cree with a transistor for flash on clash

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •