I put a shaved-down momentary switch in the control box that linked to the clash sensor pads on the stock MR board, to allow a type of "blaster deflect" option.
green Flex 3.jpggreen Flex 1.jpggreen Flex 2.jpg
Green ROTS Conversion
I put a shaved-down momentary switch in the control box that linked to the clash sensor pads on the stock MR board, to allow a type of "blaster deflect" option.
green Flex 3.jpggreen Flex 1.jpggreen Flex 2.jpg
So certain are you; always with you it cannot be done.
Hear you nothing that I say?
http://www.plecterlabs.com/Media/Doc...deTutorial.pdf
http://forums.thecustomsabershop.com...Hardware-Saber
---------------------
Reply With Quote
Bookmarks