The tactile switches have 4 contacts. Does anyone know how to wire these? Any diagrams?
http://www.thecustomsabershop.com/SP...?ItemId=368426
Wiring Tactile Switches
The tactile switches have 4 contacts. Does anyone know how to wire these? Any diagrams?
http://www.thecustomsabershop.com/SP...?ItemId=368426
It looks like I may have answered my own question via this forum archive
http://www.fx-sabers.com/forum/index.php?topic=32049.0
Please confirm if correct.
Use a multi-meter. Some tactile switched have two contacts for Normally Open (NO) and two for Normally Closed (NC). However, some are usually NO with two pair of contacts to operate two circuits. I do not get my switches from the store so I can not comment on which style they have.Originally Posted by jsummit
Last edited by FenixFire; 07-21-2016 at 08:33 AM.
Use either pair of 'legs' on one side or the other. If you have your LEDs wired, and resistored, you can use them with your battery to test your switch. This is really crude but if it Helps..... Attachment 14228
Last edited by Greenie; 07-21-2016 at 02:08 PM.
What are you wiring them to? (soundboard or stunt saber)
Posting Permissions
Reply With Quote
Bookmarks