Hello hello hello

I'm building my first saber with sound.

Basic Parts list:
Using a Nano Biscotte (V3).
Tri-cree XP-E2 RGRB
I've done the calculations and checked online and watched the videos.
My results and the videos and the online calculators don't quite line up.
I have calculated that I need
Red Die: 1.2Ω 1.2W Resistor. (?)
Green Die: 0.11Ω 0.11W Resistor. (Rounded as suggested to a 0.5Ω 1W)
Royal Blue Die: 0.29Ω 0.29W Resistor. (Rounded as suggested to a 0.5Ω 1W)

My problem comes in at the Red Die
Some calculators on the net say 1W is sufficient for this resistor, the information I have for the Wattage of a resistor is the higher the better (usually aim for Double calculated Wattage).
I saw Tim used a 3W resistor for his red Die in the video tutorial on wiring a FoC using the NB v3.

What I the overall consensus of this, is a 1W sufficient or should I look for a 3W?
I would I can Buy for TCSS but the shipping is hell as I live in Japan

Thanks
P.S if this is in the wrong place of done incorrectly, I apologize, I'm new to most of this and will happily correct my error