Using the following:
Nano Biscotte v3
18650B LI-ION BATTERY 3400mAh 3.7v
Recharge port
2x Amber Accent LEDs (Forward Voltage: 2.8 ~ 3.0v / Forward Current: 20mA each) with a Dyna_Ohm resistor

These methods DO work (actually turn on LEDs):
Wire the battery straight to LEDs
Battery to recharge port / recharge port to LEDs

These do NOT work:
Battery to reharge port / Port to NBv3 / NBv3 3.3v accent pad to LEds
Battery to reharge port / Port to NBv3 & tap wires for LEDs into the main +&- of NBv3

For some reason as soon as I include the NBv3 in the wiring my accent LEDs wont turn on. Im at wits end and can't figure out what the problem is. Any suggestions on what I can try next?