Where is the blade builders swing sensor?
Theres three things sticking out the back of the board. The green thing is probably a capacitor, but there's a black cylinder above it and one above that one which I'm trying to figure out which are the swing. The reason being is because the swing detection isint so good so I want to solder another and put it near the pomell.http://m.imgur.com/64ZtgsEScreenshot_2016-05-18-23-37-13_1.jpg
If the blade builder's card is like any of the other Hasbro ones, that looks like the clash sensor.
When you do things right, people won't be sure you've done anything at all.
Which one is? The top most or the middle?
Based on the information presented in this thread, the green "capacitor" looking thing is the clash sensor, and the black cylinder is the swing sensor.
When you do things right, people won't be sure you've done anything at all.
Thank you
Posting Permissions
Reply With Quote
Bookmarks