I am hooked on building these things. First saber was a Sith sink tube stunt build (not pictured) part of 2015 Halloween costume.
Second build was a Sith saber (with sound) named Oppr?r (Norwegian spelling loosely translates to revolt or turmoil).
Next I built a Sith Stunt for my oldest son, I used the Black Wrinkle powder coating on the hilt (TCSS did the powder coating) . fourth build was a Jedi Sentinel Stunt for my daughter. Currently working on Jedi Counscillar build for my sister-in-law.
SPECs for OPPROR:
Cree red-orange LED
Nano-Biscotte V2 (darkmeat font)
3.7 Li-ion
MHSv1 Hilt style 4
MHSv1 ribbed extension
1.5 ID brass sink tube extension (shroud material). A single piece for both emmiter and pommel shrouds
12mm momentary red ring switch
(1)TrustFire Protected 3.7V 2400mAh 18650 Lithium Battery (2-pack)
( 1-3/16" ID Black O-ring
MHSv1 insert style 12
MHSv1 Pommel style 6
MHSv1 Blade holder style 4
28mm 2W Bass speaker
6-32 blade retention screw
I still need to do some finishing sanding on the shroud to clean up some of the edges. Yes the tips are sharp and I have already impalled my hand with the emmiter shroud while sliding a blade in the blade holder.
IMG_20160427_184447858.jpgIMG_20160427_184548552.jpgIMG_20160429_122548391.jpgIMG_20160505_171634724.jpg
Bookmarks