Results 1 to 3 of 3

Thread: Sink tube options

  1. #1
    Board Lurker
    Join Date
    Apr 2016
    Location
    United States of America
    Posts
    5

    Default Sink tube options

    I planned on making a complete MHS build for my first saber, but I just came across a couple pieces of 1.5" sink tube. Are MHS parts the only parts that are sized to fit inside of them, or is there some PVC or other tubing that will fit inside as well? I plan on using 1.5" sink tube to MHS connectors for the blade holder and pommel, so i don't necessarily need the tubing threaded to other parts, just secure inside the sink tube and hiding the interior (after using dremel on sink tube). Thanks
    Last edited by mlsmith22; 05-07-2016 at 02:01 PM.

  2. #2

    Default

    yes PVC will fit you just need to find the right size. also you might try homedepot.com/Lithonia-Lighting-4-ft-Fluorescent-Tube-Protector for covering a chassis
    so i don't necessarily need the tubing threaded to other parts
    sink tube is too thin to be threaded. You connect the mhs adapters with screws (usually)
    MHS-to-15-sink-tube-adapter
    "Has 4 pre-drilled and tapped 8-32 holes that you can use to mount it."

  3. #3

    Default

    1-1/4 sink tube with #18 o-rings fits snugly inside 1.5 sink tube.
    "vibrations within vibrations, traveling at the speed of color"

    "I've got a bad feeling about this..."

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •