New !!! Project SW Force Aweken Rey lightsaber

[Narot]

Hi everybody i bought recently some parts from tcss store for building my sinktube graflex replica :

There is my parts list :

Prizm sound board
2 watt 20mm speaker
18650 battery ncr pannasonic + charger
i have a battery pack for the 18650 3,7v 3400 mah battery
tri-cree led MBTCLED : Red die, Green die, Blue die
18 degree rebel cree trans lens
12mm Anti Vandal Momentary Blue Ring Switch
USB to 3.5mm R.I.C.E.? cable
Power Xtender? 2.0
Tamiya to JST charger adapter
Graflex Red Button Replica Thumbscrew
2.7ohm 10w resistor
20mA DynaOhm? Variable Resistor
3/4" D-Ring
1 inch blade with 1 inch blade white film
BuckPuck 1000mA 6-wire
3.5mm R.I.C.E.? Port Style 1

I will need to bought :

1.25 od sink tube
pvc pipe for the main bodies
and other parts

so My first question is for my 1000ma running led it ok for my circuit how i bought

0.47ohm 5w resistor x2
1.2ohm 3w resistor x2

x2 for eventuality error

i would like to to have some diagram because i want to put a kill key on my setup and my momentary blue ring switch
i want to put a momentary switch for blaster shock and force sound did you know help me with that

thank you for advance help i will put some photo of my design of my lightsaber.

[Silver Serpent]

You have some things you don't need. The BuckPuck doesn't work with the Prizm. The 0.47 ohm and the 1.2 ohm resistors should be good for your main LEDs. I don't think you'll need a Power Xtender with the Prizm.

Read the manual for your sound board. You will find wiring diagrams in there.

[Narot]

So i will upgrade my post soon i will transfer my photos of my parts. I will buy a sink tube and white pvc pipe for my project and copper plumbing cap for the heat sink and other thing i will need i hope to receive the charger for my 3,6v 3400mah panasonnic battery lithium ion how i bought i hope it ok for the prizm it a NCR18650B Li-ion MH12210 on amazon they said was a 3,7v 3400 mah i hope 3,6 if enough so tell me what did you think i will put photos of my progress project soon as possible. Step by step

see you later...

[Silver Serpent]

That battery will work fine.