Results 1 to 3 of 3

Thread: Arrrgh! It doesn't work!

  1. #1

    Default Arrrgh! It doesn't work!

    I just finished up the wiring and it isn't working! Here is a diagram of what I have. I did have a mishap in the process and had the positive wire break from its contact on the battery and had to re-solder it. Would this drain the battery? A dead battery perhaps? Wrong wiring? I also used JST connectors for everything. Should I wire directly to the board? Any help is greatly appreciated. I'd just like to get a functioning saber!

    Nb WIRING DIAGRAM.jpg

  2. #2

    Default

    First off, "It's not working" gives us no idea of what the problem is and won't get you much help. Assuming by that you mean the board isn't booting, try charging the battery first, then try checking your connections with a multimeter.

  3. #3

    Default

    Actually, problem solved! I just connected it to another battery I have and it worked great! Most likely then my other battery just lost its charge due to the line break and re-solder repair. Recharging that one.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •