Recharge Port Double Check

[darth_chasm]

Hey,

I have a recharge port with a different pin out than the switchcraft from the store and I want to make sure my understanding of the wiring is correct.

Here's the schematic...

Screen Shot 2016-04-26 at 10.26.58 PM.png

I have...

Pin (1) = PIN - goes to board and battery positive
Pin (2) = SLEEVE - goes to battery negative
Pin (3) = SLEEVE SHUNT - goes to board negative

Is this correct?

[NanoRex]

Looks correct to me. I would also verify the polarity of your charger to make sure the center pin is positive and the outer part is negative.

[darth_chasm]

Thanks for the second set of eyes. All is good. Wired correctly and custom kill key (pen tube) works