Please Revise Wiring

[erlomd]

Before I ruin a perfectly good NBv3, I would like a revision of the wiring to see if it is good to go...I had some trouble with the tactile switch where it would sometimes work perfectly well, other times it would just turn on and would not cycle through the sound banks...

heres what Im working with:

[Silver Serpent]

You have the main LED and FoC pads reversed in your diagram. Other than that, it looks good.

Your accent LEDs will be on as soon as you pull the kill key. If you want them to turn on and off with the blade, move their negative connections to the 3rd pad (LED -) on the board.

[erlomd]

You have the main LED and FoC pads reversed in your diagram. Other than that, it looks good.

Your accent LEDs will be on as soon as you pull the kill key. If you want them to turn on and off with the blade, move their negative connections to the 3rd pad (LED -) on the board.

thanks man! yeah, I figured I would mix up something... i drew it from memory...and your right, I will attach the acc. led to the main LED (-)...that way it should also give me that shimmering effect like the blade when on...I don't have a crystal chamber but something similar that should look cool:

13015468_10209623021277082_4994944292652611579_n.jpg13029728_10209623021637091_5866424897196892312_o.jpg13040923_10209623023277132_217610760972542234_o.jpg13055216_10209623021397085_7104624501111783776_o.jpg13055863_10209623021997100_3629923120265273388_o.jpg