Results 1 to 4 of 4

Thread: Testing Speaker

  1. #1

    Default Testing Speaker

    I was soldering my speaker wire on and solder got into an area that worries me. Is there a way to test the speaker without soldering it to the board? I don't have my speaker mount yet and just want to test the speaker to make sure it will work properly before wiring it up.

  2. #2

    Default

    Well you can always connect the battery and a switch to the board then touch the two sides of the speaker to the board. When I tested mine, I really just taped everything together or used a bread board then turned it on.

  3. #3

    Default

    You can just touch the leads to the ends of a regular AA battery and check it. You should hear static.
    末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末

  4. #4

    Default

    I tested it with the AA first and then decided to go ahead and just do a quick boot up test on the nano biscotte. Booted up fine and sound pretty good. Thanks for the suggestions.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •