Few PVC's and a MHS

[Askew Wai]

The unnamed saber is stunning! It reminds me of knuckle bones. Talorum is Latin for dice.

[JakeSoft]

JackSoft,
I took a piece of 2" or 3" PVC pipe (can't remember what i used), made one cut lengthwise and slowly heated with a heat gun till it got all floppy like
then slowly unrolled and started flatteneing it out.
Once i got it mostly flat i heated it up as much as i could before it burned/discolored then took a heavy, flat plate of steel and pressed it down on top of the PVC until it fully cooled.
Took forever but it made a rather nice plate of PVC to work with.

Ok, cool. So, how'd you make the switch box on Rising Sun? Is it an MHS switch box, or something else?

[Matthew_D_G]

More PVC haha, just super glued scrap pieces from the flattened pipe to make a rectangle.
Sanded the bottom to match the contour of the main handle, super glued in place then drilled/tapped for the switch and button head screw