Results 1 to 4 of 4

Thread: NB3 issue, please help me troubleshoot

  1. #1

    Default NB3 issue, please help me troubleshoot

    Hi all.
    Doing a NB3 install, tri cree GGW, recharge. I'm not getting anything when soldered with minimum connections. Just bench testing at this point, and nothing.
    battery ( charged full )
    speaker, 2 different ones
    switch, again different ones to rule that out
    I am getting 3.8v from the battery leads, and from the NB pads when they are soldered on.
    Tested recharge port and battery connections with a multimeter, seems normal. pulling the kill key results in...nothing. Nothing else is soldered on ( switch led etc )

    Formatted and reloaded 2 different sd cards and 2 speakers.
    Hit the pads with a 3v battery pack I use for testing led's, nothing. Which leads me to think my 18650 is fine.
    Checked for bridging or any damage with a magnifier, there's none that I see. I've done several of these types of install now, including PC and CF, this one just has me a bit frustrated.
    Edit: And I never solder with the sd card in =)

    Thanks
    -Darkmatter73

  2. #2

    Default

    Pics: high quality close ups.
    And a wiring diagram.

    Also, you put the sd card back in to test right?

  3. #3

    Default

    Solved on my own, once I took a break and came back I realized the problem right away. It was dumb, so maybe we don't need to discuss it lol.
    Thanks!
    -Darkmatter73

  4. #4
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,756
    Blog Entries
    2

    Default

    Hahahaha you don't get off that easy. Spill it buddy
    末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •