1" ID Cram-Fu Guru help required!

[breaveheart9805]

Hi All,

So managed to get my first build sorted without sound. All of a sudden, bang, TCSS has stock of NBv3. Expect it to arrive here in the UK in a few days.

Like a complete muppet, didnt think of the internal chassis i could use to make it work. I'd really rather not pay for the huge shipping costs for a couple of acrylic discs!

At the moment i have a single elongated battery holder in a kind of chassis which holds a momentary switch.

This video shows the chassis:

https://www.youtube.com/watch?v=f5IYq4PEObA

Wondering if anyone can see a way of fitting the NBv3 on this?

Any help appreciated!

[rlobrecht]

Since you will be removing the Pololu board, you might be able to trim down that section of the chassis and attach it there.

And if you are the Mark that Khal mentions in that video, thank you for your service.

[breaveheart9805]

Since you will be removing the Pololu board, you might be able to trim down that section of the chassis and attach it there.

And if you are the Mark that Khal mentions in that video, thank you for your service.

Thanks, shaving that board down with a dremel is my thinking at this stage!

Im not Mark, no service from me im afraid, but i share the same sentiment!