Results 1 to 3 of 3

Thread: Is this a viable option?

  1. #1

    Default Is this a viable option?

    theroretical schematic 01.jpg

    The switches would be sliding switches and I would never activate both at the same time. Would this setup be safe?
    I just did a stunt saber with three different colors and what I took away from that experience is that I absolutely hate JST connectors.

    For Clarification:
    Slide switches
    R/rB/W Tri-Cree
    3.7v 2400mAh Trustfire Battery.

  2. #2

    Default

    Activating both switches at the same time should be safe enough. You'll just get shorter run time from the battery because you'll be using more juice.

    If you use a momentary switch for the white LED, it will only light up when you hold the switch down. Sort of a pseudo flash on clash. Flash on Mash?

  3. #3

    Default

    Haha thank you, Generic, for the input and for the humor. I think I'll actually do that. I'm doing this for the Ascend that I have and since Rob makes them with the second hole for a momentary that would just be easiest. Filing/"Dremeling" out a slot to fit a slide switch in there would be a gigantic pain in the butt.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •