-
Force Aware
Is this a viable option?
theroretical schematic 01.jpg
The switches would be sliding switches and I would never activate both at the same time. Would this setup be safe?
I just did a stunt saber with three different colors and what I took away from that experience is that I absolutely hate JST connectors.
For Clarification:
Slide switches
R/rB/W Tri-Cree
3.7v 2400mAh Trustfire Battery.
-
Jedi Initiate
Activating both switches at the same time should be safe enough. You'll just get shorter run time from the battery because you'll be using more juice.
If you use a momentary switch for the white LED, it will only light up when you hold the switch down. Sort of a pseudo flash on clash. Flash on Mash?
-
Force Aware
Haha thank you, Generic, for the input and for the humor. I think I'll actually do that. I'm doing this for the Ascend that I have and since Rob makes them with the second hole for a momentary that would just be easiest. Filing/"Dremeling" out a slot to fit a slide switch in there would be a gigantic pain in the butt.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks