Blade Holder and internal sled for a King-Sol

[theflightyellz]

Hi all.

Looking at putting together my first build, a modified King-Sol flash that I'd ideally like to fit with a nano-biscotti and blade set-up.

Album below with some photos of the base flash - I'll be adding some grips, a D-Ring and (hopefully) a Heiland emitter shroud.

http://imgur.com/a/jx8NZ

As far as internals go though, does anyone know of any compatible blade holders and sled setups to house the board, batteries, switch and speaker?
With it not being a Heiland or Grafflex I'm not necessarily sure what my options are.

[Silver Serpent]

You'd need to take some detailed measurements. If they're different from the Heiland or Graflex, you're most likely going to need to find a machinist to build a blade holder for you.