Results 1 to 3 of 3

Thread: Anakin rots conversion

  1. #1

    Default Anakin rots conversion

    I was disassembling my 2005 master replicas anakin rots and the one in the tutorial was different than mine. The difference was that the blade on mine had a quick disconnect between the hilt and blade I know I saw someone post about this before but I can't seem to find it. Im just wondering how to remove the clash sensor from the quick disconnect. Any help would be most appreciated.

  2. #2

    Default

    You will have to de-solder it from the pcb that the din plug is attached to. Once you have the sensor off, re-solder it to the bottom pins on the soundboard.
    Last edited by Jay-gon Jinn; 02-10-2016 at 05:20 PM.

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.

  3. #3

    Default

    Do you have a picture or diagram of which part is the actual sensor?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •