Page 4 of 4 FirstFirst ... 2 3 4
Results 31 to 39 of 39

Thread: Anyone familiar with SF hilts?

  1. #31
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,756
    Blog Entries
    2

    Default

    Quote Originally Posted by Tirreg_Kolar View Post
    Gotcha. The NB does support accent LEDs, right?
    Not like other boards but there are ways to use them.

  2. #32

    Default

    will the power xtender 2.0 work on the NB V2? for flash on clash tcss website says that the nb is flash on clash compliant when you use an external power extender
    "I don't believe it!"
    "That is why you fail."

  3. #33
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,756
    Blog Entries
    2

    Default

    Quote Originally Posted by Tirreg_Kolar View Post
    will the power xtender 2.0 work on the NB V2? for flash on clash tcss website says that the nb is flash on clash compliant when you use an external power extender
    Yes, you need a PEX for FOC on the NBv2.
    末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末

  4. #34

    Default

    awesome. Thanks for your help!
    "I don't believe it!"
    "That is why you fail."

  5. #35

    Default

    best way I have found to do installs on those is to do a custom PVC chassis, as far as switch and recharge, SF just glues them in... seems absurd to me but thats what they do, switch goes right in, for recharge you can drill and tap the dummy switch they use as a place holder and mount your port that way. I know the allure to them, they make nice looking hilt but doing the install always makes me regret the purchase.

  6. #36

    Default

    Since you've worked with SF hilts, do you know if a MHS pommel would fit? If it does, that'll give me another inch or so of room to work with.
    "I don't believe it!"
    "That is why you fail."

  7. #37

    Default

    SF hilts are not MHS compatible. The threading on them is different.

  8. #38

    Default

    Quote Originally Posted by jordanbeck724 View Post
    best way I have found to do installs on those is to do a custom PVC chassis
    What size PVC should I use if I went that route? And would I need to construct something similar to what rob at Genesis Custom Sabers does for his builds?
    "I don't believe it!"
    "That is why you fail."

  9. #39

    Default

    not sure, just bring your empty hilt with to the hardware store and see what fits, and kinda, although you dont need anything as elaborate as Robs, keep your dremal handy as you may need to get creative based on how much room you have. also in my case the pvc was able to easily be adapted to hold a 20mm speaker, so yay for that.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •