will the power xtender 2.0 work on the NB V2? for flash on clash tcss website says that the nb is flash on clash compliant when you use an external power extender
"I don't believe it!"
"That is why you fail."
awesome. Thanks for your help!
"I don't believe it!"
"That is why you fail."
best way I have found to do installs on those is to do a custom PVC chassis, as far as switch and recharge, SF just glues them in... seems absurd to me but thats what they do, switch goes right in, for recharge you can drill and tap the dummy switch they use as a place holder and mount your port that way. I know the allure to them, they make nice looking hilt but doing the install always makes me regret the purchase.
Since you've worked with SF hilts, do you know if a MHS pommel would fit? If it does, that'll give me another inch or so of room to work with.
"I don't believe it!"
"That is why you fail."
SF hilts are not MHS compatible. The threading on them is different.
not sure, just bring your empty hilt with to the hardware store and see what fits, and kinda, although you dont need anything as elaborate as Robs, keep your dremal handy as you may need to get creative based on how much room you have. also in my case the pvc was able to easily be adapted to hold a 20mm speaker, so yay for that.
Bookmarks