Page 1 of 7 1 2 3 ... LastLast
Results 1 to 10 of 65

Thread: Korbanth Graflex 2.0 1st Saber Build list

  1. 01-24-2016, 08:13 AM #1
    erlomd
    erlomd is offline
    erlomd's Avatar
    Join Date
    Jan 2016
    Location
    usa
    Posts
    111

    Default Korbanth Graflex 2.0 1st Saber Build list

    Thanks to the contribution of members here and their advices, I have been able to come up with a pretty good parts list for my Korbanth Graflex.

    Here is a list of parts Ive purchased and you tube videos that I have found helpful.

    -Graflex 2.0 Lightsaber

    -Nano Biscotte v3 or v2 (whatever becomes available first...hopefully the v3)...if anyone knows where and how I can get my hands on either it will be most appreciated!

    -2w 28mm Bass speaker

    -3D printed Chassis for the NBv2 or v3

    -18650 Lithium Ion Battery

    -3.7 Volt Charger

    -2.1mm Recharging Port

    -BLUE/BLUE/WHITE Tri Cree Xpe2 LED & Heatsink (sold separately from the same place):

    -Various assortment of colored wire 28awg and 30awg

    -7/8 Blade

    I haven't decided on weather I want a clamp activation switch or the standard switch on the top.
    Last edited by erlomd; 02-01-2016 at 09:32 AM.
    Reply With Quote Reply With Quote
  2. 01-24-2016, 08:20 AM #2
    erlomd
    erlomd is offline
    erlomd's Avatar
    Join Date
    Jan 2016
    Location
    usa
    Posts
    111

    Default

    Update:

    I just ordered 7/8 Blade plugs

    ARKM_Razor_Turbine-R2-02.jpg
    ARKM_Razor_Turbine-R2-01.jpg
    Last edited by erlomd; 01-24-2016 at 07:37 PM.
    Reply With Quote Reply With Quote
  3. 01-24-2016, 08:29 AM #3
    erlomd
    erlomd is offline
    erlomd's Avatar
    Join Date
    Jan 2016
    Location
    usa
    Posts
    111

    Default

    And here are some pictures of my LED's & Heat sink that cam in the mail the other day...Very Excited as you can tell

    Screen Shot 2016-01-24 at 9.51.16 AM.jpgScreen Shot 2016-01-24 at 10.28.30 AM.jpgScreen Shot 2016-01-24 at 10.28.40 AM.jpgScreen Shot 2016-01-24 at 10.28.55 AM.jpgScreen Shot 2016-01-24 at 10.29.04 AM.jpg
    Reply With Quote Reply With Quote
  4. 01-24-2016, 11:14 AM #4
    Jay-gon Jinn
    Jay-gon Jinn is offline
    Council Member
    Jedi Council Member     Jay-gon Jinn's Avatar
    Join Date
    Jan 2007
    Posts
    3,739

    Default

    Posting links to competitors products is prohibited on the forum...please edit your post to remove them, per the Forum Guidelines: http://forums.thecustomsabershop.com...rs-please-read

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
    Reply With Quote Reply With Quote
  5. 01-24-2016, 07:38 PM #5
    erlomd
    erlomd is offline
    erlomd's Avatar
    Join Date
    Jan 2016
    Location
    usa
    Posts
    111

    Default

    whoops... got carried away
    Reply With Quote Reply With Quote
  6. 02-01-2016, 09:43 AM #6
    erlomd
    erlomd is offline
    erlomd's Avatar
    Join Date
    Jan 2016
    Location
    usa
    Posts
    111

    Default

    learning as I go guys, but apparently (as if everyone knows this except for me) you need a thermal sticker under your LED board to be held in place to the heat sink.
    here is a link to TCSS part I am referring to: http://www.thecustomsabershop.com/St...-pad-P483.aspx


    not breaking the bank or anything but just some FYI.

    as for updates...graflex is on hold as well as the NBv3 until more inventory is made available...Ive learned to be patient and mindful of my my thoughts.
    Reply With Quote Reply With Quote
  7. 02-01-2016, 11:35 AM #7
    Silver Serpent
    Silver Serpent is offline
    Jedi Council Member Silver Serpent's Avatar
    Join Date
    Jul 2010
    Location
    USA
    Posts
    4,152

    Default

    They're cheap. Grab a couple or three. Just in case you need to remove the LED for soldering work.
    We all have to start somewhere. The journey is all the more impressive by our humble beginnings.

    http://led.linear1.org/1led.wiz for the lazy man's resistor calculator!
    http://forums.thecustomsabershop.com...e-to-Ohm-s-Law for getting resistor values the right way!
    Reply With Quote Reply With Quote
  8. 02-01-2016, 05:45 PM #8
    x-4creator135
    x-4creator135 is offline
    x-4creator135's Avatar
    Join Date
    Apr 2012
    Location
    Henrietta, NY
    Posts
    10

    Default

    Quote Originally Posted by Jay-gon Jinn View Post
    Posting links to competitors products is prohibited on the forum...please edit your post to remove them, per the Forum Guidelines: http://forums.thecustomsabershop.com...rs-please-read

    We are all one with the Force, we all love star wars, and we all are doing this hard complicated process for one purpose...to be the Jedi or Sith we were destined to be. Competitors for business sure but truly everyone is one with the force with each other. Everyone coming together and spending hours and hours of either actual working on a saber or just making forum posts and videos explaining in depth of how to create this lifetime dream in front of your eyes with your own hands.
    MAY THE FORCE BE WITH YOU
    the x-4 creator
    Reply With Quote Reply With Quote
  9. 02-02-2016, 10:47 PM #9
    erlomd
    erlomd is offline
    erlomd's Avatar
    Join Date
    Jan 2016
    Location
    usa
    Posts
    111

    Default

    Just ordered my NBv3!!! finally can't wait
    Reply With Quote Reply With Quote
  10. 02-04-2016, 11:16 AM #10
    DeathlyTaco
    DeathlyTaco is offline
    Join Date
    Jan 2016
    Location
    USA
    Posts
    1

    Default

    Quote Originally Posted by erlomd View Post
    Just ordered my NBv3!!! finally can't wait
    I think I'm almost at the same place as with you in build progress, just got word my NBV3 shipped.

    Mind if I ask what you decided on a chassis?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules