Hi!
Will two short 16mm switches fit on opposite sides of a main body or extension without touching each other? That is to say, are the short 16mm switches less than half of the diameter of a body/extension?
Thanks!
Hi!
Will two short 16mm switches fit on opposite sides of a main body or extension without touching each other? That is to say, are the short 16mm switches less than half of the diameter of a body/extension?
Thanks!
Doubtful. Take a look at the dimensions tab here http://www.thecustomsabershop.com/16...itch-P617.aspx
You also have to take into account wires, solder and heat shrink.
Last edited by darth_chasm; 01-23-2016 at 01:02 PM. Reason: originall said 3rd photo. meant dimensions tab.
Hrmm... What about the 12mm? I can't seem to find the other dimensions on those.
I don't think there is a "short" version of the 12mm, And I doubt that if it is shorter than the 16mm, it wouldn't be by much.
You're better off either offsetting them or using a different selection of switches.
You can if you use bezels. Otherwise, no. I've tried.
Bookmarks