NVB won't turn off, constantly plays swing sounds if picked up

[Crims]

Ok, I charged the battery fully which solved the swing sounds. It still won't turn off though.

I found one other person having this problem, didn't see a resolution on it. I also checked the settings file and the power off time is set to 200, as it should be.

[Greenie]

You may have bridged two pads

[Silver Serpent]

Do you have a latching switch, or momentary switch?

The NB only takes a momentary switch.

[Crims]

I made sure it's a momentary. I can try resoldering if necessary.

[Crims]

I resoldered the speaker wires only (and drilled a separate hole in the chassis for them so they wouldn't cross the board. Works normally now!

EDIT - and now back to where I was before after one wire broke off and had to be resoldered. Ugh.

EDIT 2 - After a bunch of re-soldering it works. THANK THE MAKER.