Results 1 to 3 of 3

Thread: C battery version, on/off on board

  1. #1

    Default C battery version, on/off on board

    Found a used saber off the bay, and took it apart. Odd that this is a C battery version and the on/off switch is built in to the board. Did a search but didnt find any info on this. How would i wire this thing in to a saber?

    Thanks.


    top.jpg

    bottom.jpg


    exploded.jpg

  2. #2

    Default

    Did some testing with jumper wires, this board and parts will work with a 18650 battery at about 3.7 volts, vs the original with 2 C batteries at 3.0V.

    And looked at the board a bit more and it looks like I can solder the momentary switch to these 2 joints(Circled in red) and all works. Next on to figuring out how to get the LED in to the mix. Hope this helps someone.

    22.JPG

  3. #3

    Default

    Thread Necro card Played!

    Kidding, this did actually help me a lot, there is quite a few different boards out there. Any luck finishing with this one? I've gotten mine to power blue cree's without a transistor and am working on using this board with a charge port. The charge port has been the challenge! Will post pics when finished.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •