First build list any help would be appreciated!

[Jake]

Ok so I was testing my rgb leds I got for my cc with the 20ma dynaohm resistors I have. Blue and green are good but my red is bright to start with and just gradually gets dimmer until it goes completely out...am I doing something wrong or do I have bad leds?

[Cire Yeldarb]

Did you make sure the DynaOhm is installed correctly in the In-Out configuration? Its a one way kind of thing

[Jake]

Yes, because it just doesn't turn on the other way.

[Cire Yeldarb]

just checking!

[Jake]

I figured it out....a few bad leds...thanks for the help anyway though

[Jake]

lightsaber chassis.jpg its aaaaaallllllllllllliiiiivvvvvvvvvvvveeeeee!!!!!!!!

[Jake]

so things that went wrong, I wired my red and blue cc led backwards and when installing the board into the chassis discs i wasnt careful enough and knocked off what I assume to be a small resistor next to the movement sensor.....that was a pain but I assume I got it back on correctly because everything works. Thanks to everybody that has helped me troubleshoot everything!