Results 1 to 6 of 6

Thread: NB with flash on clash help

  1. 12-09-2015, 03:09 PM #1
    daviesevan68
    daviesevan68 is offline
    Join Date
    Nov 2014
    Location
    United States
    Posts
    22

    Default NB with flash on clash help

    I just switched from a single die to a GGW and a PEx for flash on clash. Everything seems to be wired right but it shuts down when it tries to flash. It doesn't do it every time and the swing sounds seem to be going off too often and when the saber is still. Any ideas would be appreciated.
    Reply With Quote Reply With Quote
  2. 12-09-2015, 03:18 PM #2
    darth_chasm
    darth_chasm is offline
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,756
    Blog Entries
    2

    Default

    Low batteries or improperly calculated resistors. For the swings anyway.

    Not sure about the FOC and shutting off. Could be related to the above.
    Reply With Quote Reply With Quote
  3. 12-09-2015, 04:04 PM #3
    clahey83
    clahey83 is offline
    Join Date
    Feb 2012
    Location
    Tulsa, OK
    Posts
    69

    Default

    try adjusting your drive parameter down.
    Reply With Quote Reply With Quote
  4. 12-09-2015, 04:10 PM #4
    Greenie
    Greenie is offline
    Greenie's Avatar
    Join Date
    Jan 2015
    Location
    England
    Posts
    1,184

    Default

    Have you fully charged? My NB swings randomly when the battery is low.
    Reply With Quote Reply With Quote
  5. 12-09-2015, 04:18 PM #5
    daviesevan68
    daviesevan68 is offline
    Join Date
    Nov 2014
    Location
    United States
    Posts
    22

    Default

    Thanks everyone. I was suspicious of the battery so I will give it a charge and go from there.
    Reply With Quote Reply With Quote
  6. 12-10-2015, 10:33 AM #6
    daviesevan68
    daviesevan68 is offline
    Join Date
    Nov 2014
    Location
    United States
    Posts
    22

    Default

    Thanks everyone I got it working. I charged it up and it was still having issues so I checked the resistors and that was the problem.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules