So I am going to attempt my first build and could use some assistance making sure I get all the things I need. Here is what is on my list so far
-Rebel Star LED Module MHSV1 (amber)
-JST Female connector 24awg blue/white (for BuckPuck connection)
-16mm Anti Vandal Short Momentary Switch (orange ring)
-MWS Momentary to Latching Converter
-BuckPuck 700mA 4wire
-Li-ion 18650, 3.7v 2600mAh rechargeable battery module
-MWS Recharge port
-20mA DynaOhm Variable Resistor
-Acrylic Chassis Discs for Recharge Port
-Acrylic Chassis Discs for PC 2.0 & 18650 (s2)
-Chassis Disc (style 4)
-Stainless 4-40 all thread (x2)
-MHS Speaker mount (v5)
-2w 28mm Bass Speaker
-Petit Crouton Sound Module v3.5
This is what I want to assemble my chassis with, then I will be able to decide on a hilt, blade holder, pommel and chokes after I know the chassis works.
I want to have a rechargeable saber without having to take it apart. Is it possible for the port to be in the pommel?
The switch I assume needed the 20mA DynaOhm resistor for the LED ring
The speaker is what confuses me most, how is it connected to the Petit sound module?
Thanks for the help!
Bookmarks