Results 1 to 5 of 5

Thread: First Lightsaber Build

  1. #1

    Default First Lightsaber Build

    Hello guys,

    I'm new to the Lightsaber building and I have some questions.
    1. What is the difference between an TCSS and Corbin Blades?
    2. Will these parts fit properly?: http://www.thecustomsabershop.com/Me...yWishlist.aspx

    SaberBuilder_render7.jpg

    Hope you guys can help me with this.

    killer3001000

  2. #2
    Jedi Padawan
    Sith Adept
    Jedi Padawan
    Cire Yeldarb's Avatar
    Join Date
    May 2013
    Location
    United States
    Posts
    595

    Default

    TCSS Blades have a diffuser tube in them, Corbin Blades have multiple wraps of film inside. Corbin blades are supposed to have more of a "core" look to them.

    and I cannot see your wishlist from that link...

  3. #3

    Default

    Thank you for the reply Cire Yeldarb.
    Here's a new link to my wishlist: http://www.thecustomsabershop.com/Vi...3-9a686b5723da

  4. #4
    Jedi Padawan
    Sith Adept
    Jedi Padawan
    Cire Yeldarb's Avatar
    Join Date
    May 2013
    Location
    United States
    Posts
    595

    Default

    You'll want to add a C Clip to hold your pommel insert in place
    You have the lens right, you just need to add the lens holder
    If you want your switches' LEDs to light up you'll want to pick up a dyna-ohm resistor each, unless youve already sourced resistors elsewhere
    You'll also want to make sure you have a resistor on your main LED
    Is your "Drill & Tap Hole (8-32)" service for the Covertec or for the Blade Retention screw? You don't specify

    Those are the only issues I see right now...

  5. #5

    Default

    Alright, thank you very much for your advise!
    I now updated my wishlist and it should all be right.
    I already have enough resistors and I will drill the two holes for the Covertec and the Blade Retention screw myself.
    Here's the updated list: http://www.thecustomsabershop.com/Vi...3-9a686b5723da

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •