Switch AV, Rice and recharge placement for new MHS box 14?

[Mikemozzzy]

Hey guys getting back in to the saber scene after a long long sabbatical, since the accident EL days. Gonna be building a prizsm or CF7.5 TRI Cree saber. I'm an electrician so the wiring/electronics isn't an issue. The MHS switch placement is however. I plan on using a blade holder 22, #2 choke, ribbed v grove extension, 2 in double female, ribbed extension, MHS gear and pommel in that order.


So basically I need to find placement for 2 lit av switches a rice port, and recharge part. I like box 14 although am not sure if it will fit on the ribbed extension, is that possible. Or would it make more sense to spread the switches and ports out through both extensions? Or is there a better solution to my switch/port issues? Any suggestions or advice is welcome.

[Silver Serpent]

Any of the boxes will fit on the ribbed extension, though there will be gaps underneath from the grooves. You can either carefully grind down the extension so the box sits flush, fill in the grooves with putty or something, or just enjoy the gaps underneath. All are valid options.

I recommend keeping the switches and such close together. Spreading them out around the hilt will eat up valuable internal real estate VERY fast.