-
Jedi Initiate
I had Tim modify one of the disks in the recharge port holder, adding in a second set of holes that lined up with the set in the NB disks sized for the smaller diameter of the ribbed section. It ends up slightly rotated, but it worked.
http://s882.photobucket.com/user/am2...332ff.jpg.html
-
Hey madcow!
Yeah I'm making notes on this with my first build and pli clearances etc. Good fun.
Goodluck~
-
Madcow,
That's what I figured. It's ok. Easy enough to do. Just was hoping for a prepaid solution. Time to break out the drill press. Unless Forgetful Jedi Knight has a new idea.
-
Jedi Council Member
No, modding chassis disks or replacing the ribbed section was going to be what I told you too, but Madcow beat me to it.
Also, that switch placement looks a little iffy to me.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks