Results 1 to 2 of 2

Thread: Battery with JST connector

  1. 09-23-2015, 02:08 PM #1
    nsxt2189
    nsxt2189 is offline
    Join Date
    May 2015
    Location
    United States
    Posts
    6

    Default Battery with JST connector

    Stupid question but....

    Whats the easiest way to wire negative and positive leads (with a tri cree) so that you can use a JST battery? Obviously getting your line in place, adding your appropriate resistors then at some point connecting a female JST to them? I am just building a no sound saber for now, with a momentary switch (and the 2.5 -7 v, momentary to latching board) to a 3.7v 18000mah panasonic w/jst connectors.

    Thanks!
    Last edited by nsxt2189; 09-23-2015 at 02:10 PM.
    Reply With Quote Reply With Quote
  2. 09-23-2015, 02:22 PM #2
    Generic Jedi
    Generic Jedi is offline
    Jedi Initiate
    Join Date
    Apr 2015
    Location
    USA
    Posts
    370

    Default

    Everything (battery, led, and switch) will be connected to the momentary to latching converter board, so you really only need one jst connector from the board to the battery. You could put jst connectors between the board and switch, and the board and led, if you want.

    Jst connectors are a pain to crimp...but make it easier to dismantle your saber for upgrades and maintenance.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules