https://youtu.be/JbHpTKiLfA4
OK - so you don't need to buy ALL the resistors... just the 3w or 5w ones with values .5 - 5.6 Ohm
https://youtu.be/JbHpTKiLfA4
OK - so you don't need to buy ALL the resistors... just the 3w or 5w ones with values .5 - 5.6 Ohm
Good stuff !
Great video, very informative!
Thanks for another awesome video! (I kind of wish these were out when was first researching how to build my own saber).
This is just what I did last week to play with getting a purple out of an old R/G/rB tri rebel I had wired up (but never used).
image.jpgimage.jpg
Sometimes simple just works. For just a few $, and some patience, you can experiment and play around with color mixing.
I'm NOT a fan of alligator clips for this though. I found some "mini" springs at an electronics website, that you can pry open and slot your wire/resistor into. It eliminates the need for solder, and provides a more secure connection.
image.jpg
Using Madcow's method and a lime/red orange/royal blue rebel to achieve a golden yellow blade!
IMG_20150920_020429.jpg
With this setup I get a lavender foc!
I hope my wife likes it...![]()
Great video!
Bookmarks